This tutorial is part of a paid partnership with Walmart. Disclaimer: Changing out a light in a bedroom is a quick and (often) simple project that can make all the difference. That said, working with electrical is never something to take lightly. There are many possible issues you could run into while swapping out a light, and handling any of them even the slightest bit incorrectly could cause harm to you, others, and severe damage to your home. While we will show the basic steps to hooking up a basic fixture in a standard wiring situation, each homeowner must be wise with their own projects. Contact a professional if you have any doubts or questions about the wires and connections in your specific situation, and always observe manufacturer guidelines for your fixture.
Greta’s room is one of my favorites in the house, and she loves having a “domain” to call her own. Even still, this room feels disjointed from the rest of the house because it is tucked back through the hallways, has an aggressive-patterned carpet that isn’t represented anywhere else in the home, and leans dark with the lighting. It’s also the only room in the house with standard 8ft ceilings so her current fixture, which hangs down nearly two feet, cuts heavily into the visual space of the room.
Jules and I hit our heads on this thing every time we go in here it seems, so it was time to swap it out with this stylish flush mount we got from Walmart (we rounded up a bunch of favorites at the end of the post because they can be hard to track down). The light swap was so easy, we wanted to show you how it’s done!
1. Turn off power to the circuit first, then remove the old light.
Some people might make the case that, so long as the light switch is turned off, you don’t need to turn off the circuit breaker. That’s not necessarily true. There will be times where you have hot wires connecting through your junction box for the light that carry power to other parts of the house, and these can give you a nasty jolt. So definitely turn the power off to the light you’re working on, just to be safe.
2. Remove the mounting harness and install the new one if needed.
New light fixtures almost always come with a mounting harness (called a crossbar) for your light. There are a few different kinds – some are round discs with holes and slots in it, some are straight bars with a couple holes and slots, and some are straight with a recess. If the fixture you’re removing had the same crossbar as what came with your new light, feel free to leave the old crossbar in place so long as it is still in good condition.
There may also be times where the wires for your fixture need to be fed through the crossbar before it is attached to the junction box. This should be outlined in the instructions for your fixture if it is required.
3. Prep the light fixture
Look at the wiring of your new fixture and ensure you understand how it is going to attach. Once your arms are up there holding the light, you don’t want to be fiddling with it any longer than necessary, especially if you have a heavy fixture you’re installing.
Some fixtures will have the wire coating cut so you can easily pull it off, like ours did. Others will require wire strippers. Ensure the wire is stripped about 1/2 in from the end.
If there are multiple sets of black and white wires that will be controlled by the same switch, twist all of the white wires together and all of the black wires together.
4. Connect the fixture to the wires in the junction box
Before installing, make sure your box contains a ground wire (usually plain copper with no coating, or green plastic coating). If not, connect the ground wire to the green screw on your mounting crossbar. If a ground wire is available in the junction box, use a wire nut to connect the ground wire from the fixture to the ground wire in the junction box.
Repeat this with the other wires, connecting the black wires from the fixture to the black wires in the junction box, and the white wires in the fixture to the white wires in the junction box. Twist the wire nuts until they won’t twist anymore.
Once you have the wires connected, carefully push them up into the junction box. Make sure the wire connectors are tight and do not become loose when you do this, or you’ll have a poor connection that could make your fixture not work. Loose connections are also a fire hazard.
5. Secure the fixture to the mounting crossbar
Secure the fixture to the mounting crossbar. This is unique to every fixture and the type of crossbar it comes with, so follow the manufacturer guidelines.
6. Put in the light bulbs and install the shade
Once you put the light bulbs in and before you put the shade on, you’ll want to restore power to your room and test out the light. If the light does not come on (and you are sure the bulbs themselves work) remove the fixture and check your connections to ensure they did not come loose when pushing the wires into the junction box. If all connections are correct and the fixture still will not work, have an electrician come and test the fixture for faults.
Assuming the lights do work when you test them, install the shade or glass cover and admire your new light! Or break out the paint and brush to touch up the ceiling from the previous fixture, if your situation is like ours.
Isn’t that flush mount light simple and stunning?? It comes in a few finishes and two sizes–we got the 15″ warm brass and the finish is so gorgeous in person. We linked the polished nickel one below (#2) along with 14 other beautiful flush mount fixtures from Walmart! They have a new DIY initiative (and landing page!) and we’re here. for. it.
We were deciding between 2 and 11 for Greta’s room and clearly went with 2, but I’m excited to swap out a few other lights around our home with these. Majorly swooning over 10, 4 and 6 too. Hard to pick a favorite but would love to hear yours!!
We designed the Charly line of sofas, chairs, and ottomans with perfect proportions for comfort — with wide arms, a loungey depth, and stylish and practical lumbar pillows. Available in 70 kid-friendly, pet-friendly fabrics, this line was created with families in mind.
Our wood grain Shaker cabinet fronts were designed for busy, high-traffic homes like ours. Clad with durable textured thermofoils, this line is compatible with Sektion, Akurum, Godmorgon, and Besta cabinets from IKEA. It's the perfect, practical way to add the warmth of wood to all the rooms of your home.
We have teamed up with Loloi to create a line of rugs that are as affordable as they are beautiful. This collection houses a great mix of traditional and modern rugs, in cottage-y colorways, as well as vintage-inspired beauties that you’ll want to roll out in every room.
We partnered with Stuga on a line of hardwood floors — The Ingrid is really livable, and the color is very neutral. It doesn’t lean warm or cool, it’s that just right in-between. We have really loved putting it everywhere in our house. It’s the best jumping-off point for design, no matter your interior style. In addition to being beautiful, Ingrid is really durable — we have three kids, and we always have a home construction project going on. Ingrid stands up to it all.
Looking for our favorite things? A place to shop our home room by room, or just catch up on what Julia's wearing / loving right now? Browse the CLJ shop.
Befores, afters, mood boards, plans, failures, wins. We’ve done a lot of projects, and they’re all here.
We have a long-standing relationship with DIY, and love rolling our sleeves up and making it happen.
Even when you don’t want to rip down a wall, you can make that space in your home better. Right now.
Almost daily I get asked what I would call my home style. I don’t like to box myself in, but I definitely lean Modern Traditional with an emphasis on comfort when it comes to our home. This especially came up when I shared our Powder Bath Reveal on the blog. I think it changes slightly […]
Another way for us to stay in touch! Joining our weekly newsletter gives you access to exclusive content, never-before-seen photos, your questions answered, and our favorite DIYs. Sign up below!
Make yourself right at home